Gigabyte Sata Controller Driver Z97x
Specifications:
Audio Noise Guard with LED path lighting Supports 4th and 5th Generation Intel® Core™ processors SATA Express support for 10 Gb/s data transfer Long lifespan Durable Black Solid caps Extreme multi graphics support M.2 for SSDs drives with up to 10 Gb/s data transfer Creative SoundBlaster X-Fi MB3 gaming audio suite High-end Nichicon audio capacitors Realtek ALC1150 115dB SNR HD Audio with. Supports 4th and 5th Generation Intel® Core™ processors Creative SoundBlaster X-Fi MB3 gaming audio suite Audio Noise Guard with LED path lighting Realtek ALC1150 115dB SNR HD Audio with Built-in rear audio amplifier Killer™ E2200 gaming networking platform Extreme multi graphics support SATA Express support for 10 Gb/s data transfer M.2. ATX Form Factor; Intel LGA1150 Socket; Intel Z97 Chipset; 4th/5th-Gen Intel CPU. Included with the Z97X motherboard are a driver disk, SATA cables, a SLI. Gigabyte GA-Z97X-Gaming 3 - 1.0 - motherboard - ATX - LGA1150 Socket - Z97 overview and full product specs on CNET. Network Controller Killer Gaming E2201. 6 x 7pin Serial ATA, 1 x M.2, 1 x. Do you have the latest drivers for your Gigabyte GA-Z97X-Gaming 3 Motherboard? Download GA-Z97X-Gaming 3 Motherboard driver at high speed. Drivers for ATK Package, Smart Gesture, Audio, Bluetooth, WLAN, VGA, Card Reader, BIOS, and more. Intel SATA preinstall driver for AHCI/RAID mode. View details. Version, Date: 13.6.2.1001,.
CPU:
- Support for Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1150 package
- L3 cache varies with CPU
Gigabyte Z97X-UD5H Drivers Download This page contains the list of device drivers for Gigabyte Z97X-UD5H. To download the proper driver, first choose your operating system, then find your device name and click the download button. May 14, 2014 - GIGABYTE Z97X-UD5H Overview, Visual Inspection, Board Features. We covered the nuances of the Z97 chipset in our Haswell Refresh review on. While the supplied audio drivers give a distortion issue at 100% volume,.
Chipset:
Dell Sata Controller Driver
- Intel Z97 Express Chipset
Memory:
- 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
- Dual channel memory architecture
- Support for DDR3 3200(O.C.) / 3100(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics:
- Integrated Graphics Processor:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz or 2560x1600@60Hz
- Support for up to 3 displays at the same time
- Maximum shared memory of 1 GB
Audio:
- Realtek ALC1150 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out
LAN:
- 1 x Qualcomm Atheros Killer E2201 LAN chip (10/100/1000 Mbit) (LAN1)
- 1 x Intel GbE LAN phy (10/100/1000 Mbit) (LAN2)
Expansion Slots:
- 1 x PCI Express x16 slot, running at x16 (PCIEX16)
- 1 x PCI Express x16 slot, running at x8 (PCIEX8)
- 1 x PCI Express x16 slot, running at x4 (PCIEX4)
- 2 x PCI Express x1 slots
- 2 x PCI slots
Multi-Graphics Technology:
- Support for 3-Way/2-Way AMD CrossFire and 2-Way NVIDIA SLI Technology
Storage Interface:
- 1 x M.2 PCIe connector
- 1 x SATA Express connector
- 6 x SATA 6Gb/s connectors (SATA3 0~5)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
- 2 x SATA 6Gb/s connectors (GSATA3 6~7)
- Support for RAID 0 and RAID 1
USB:
- 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
- 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
- 4 USB 3.0/2.0 ports on the back panel
Internal I/O Connectors:
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x PCIe power connector
- 1 x M.2 PCIe connector
- 1 x SATA Express connector
- 8 x SATA 6Gb/s connectors
- 1 x CPU fan header
- 1 x water cooling fan header (CPU_OPT)
- 4 x system fan headers
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 1 x USB 3.0/2.0 header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x Clear CMOS jumper
- 1 x Trusted Platform Module (TPM) header
- 1 x power button
- 1 x reset button
- 1 x Clear CMOS button
- 2 x BIOS switches
- Voltage Measurement Points
Back Panel Connectors:
- 1 x PS/2 keyboard/mouse port
- 1 x optical S/PDIF Out connector
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x HDMI port
- 6 x USB 3.0/2.0 ports
- 2 x USB 2.0/1.1 ports
- 2 x RJ-45 ports
- 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
- iTE I/O Controller Chip
H/W Monitoring:
- System voltage detection
- CPU/System/Chipset temperature detection
- CPU/CPU OPT/System fan speed detection
- CPU/System overheating warning
- CPU/CPU OPT/System fan fail warning
- CPU/CPU OPT/System fan speed control
Form Factor:
- ATX Form Factor: 30.5cm x 24.4cm
- COMPATIBLE WITH:
- Windows 7
Windows 7 64 bit
Windows 8
Windows 8 64 bit
Windows 8.1
Windows 8.1 64 bit - file size:
- 275 KB
- filename:
- mb_driver_marvell_sata_controller_9series.zip
- CATEGORY:
- Motherboard
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.
Specifications:
CPU:
- Support for Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1150 package
- L3 cache varies with CPU
Gigabyte Sata Controller Driver Z97x 2
Chipset:
- Intel Z97 Express Chipset
Memory:
- 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
- Dual channel memory architecture
- Support for DDR3 3200(O.C.) / 3100(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics:
- Integrated Graphics Processor - Intel HD Graphics support
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz or 2560x1600@60Hz
- Intel DSL5520 Chip: 2 Thunderbolt ports (MDP1/MDP2) support for Mini-DisplayPort and Thunderbolt monitor(s), and supporting a maximum resolution of 3840x2160@60Hz.
- Support for up to 3 displays at the same time
- Maximum shared memory of 512MB
Audio:
- Realtek ALC1150 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out
LAN:
- Intel GbE LAN chip (10/100/1000 Mbit)
Expansion Slots:
- 1 x PCI Express x16 slot, running at x16 (PCIEX16)
- 1 x PCI Express x16 slot, running at x8 (PCIEX8)
- 1 x PCI Express x16 slot, running at x4 (PCIEX4)
- 3 x PCI Express x1 slots
Multi-Graphics Technology:
- Support for 3-Way/2-Way AMD CrossFireand 2-Way NVIDIA SLI Technology
Storage Interface:
- 1 x SATA Express connector
- 6 x SATA 6Gb/s connectors (SATA3 0~5)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
- Marvell 88SE9172 chip: 2 x SATA 6Gb/s connectors (GSATA3 6~7)
- Support for RAID 0 and RAID 1
USB:
- 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
- 6 x USB 2.0/1.1 ports available through the internal USB headers
- Chipset + Renesas uPD720210 USB 3.0 Hub: 4 x USB 3.0/2.0 ports on the back panel
- Thunderbolt Intel DSL5520 chip: 2 Thunderbolt ports on the back panel
Internal I/O Connectors:
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x PCIe power connector
- 1 x SATA Express connector
- 8 x SATA 6Gb/s connectors
- 1 x CPU fan header
- 1 x water cooling fan header (CPU_OPT)
- 4 x system fan headers
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 1 x USB 3.0/2.0 header
- 3 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x Clear CMOS jumper
- 1 x Trusted Platform Module (TPM) header
- 1 x power button
- 1 x reset button
- 1 x Clear CMOS button
- 2 x BIOS switches
- Voltage Measurement Points
Back Panel Connectors:
- 1 x PS/2 keyboard/mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x HDMI port
- 1 x optical S/PDIF Out connector
- 2 x Thunderbolt ports
- 6 x USB 3.0/2.0 ports
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
- iTE I/O Controller Chip
H/W Monitoring:
- System voltage detection
- CPU/System/Chipset temperature detection
- CPU/CPU OPT/System fan speed detection
- CPU/System overheating warning
- CPU/CPU OPT/System fan fail warning
- CPU/CPU OPT/System fan speed control
Form Factor:
- ATX Form Factor: 30.5cm x 24.4cm
- COMPATIBLE WITH:
- Windows 7
Windows 7 64 bit
Windows 8
Windows 8 64 bit
Windows 8.1
Windows 8.1 64 bit - file size:
- 275 KB
- filename:
- mb_driver_marvell_sata_controller_9series.zip
- CATEGORY:
- Motherboard
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.